48V Ebike Charger for 13S Lithium Battery Pack

For your batteries to last 10 times longer, it is recommended to avoid using batteries below 35% and to refrain from charging them above 85-90%. The charger provides protections against short circuit, overload, and over voltage. The LED display shows red when charging and green when fully charged. The charge mode is CC to CV, specifically designed for lithium batteries.

The input voltage for the charger ranges from 100-240 V at 50/60 HZ, while the suitable voltage and frequency are 90-264 V at 47/63 Hz. The output voltage is 54.6 V with an output current of either 1.5A or 3A, depending on the selection. The power output is 81.9 W with a productivity rate of 80%. The charger operates within a working temperature range of 0-40 ° C and a storage temperature range of -20-85 ° C. The working humidity level is between 5% and 90% RH.

To ensure the proper use and maintenance of the charger, follow these guidelines: 1. Connect to the battery before plugging into AC power when charging. Disconnect the AC power before removing the battery plug to prevent damage to the charger. 2. Allow the charger to complete the charging cycle indicated by a green LED display before use. 3. Avoid completely draining the battery before charging to prevent damage. 4. Perform a deep discharge every 3 months for optimal battery performance. 5. Charge the battery if it has been unused for an extended period of time. 6. Store the charger in a dry place when not in use. 7. Avoid leaving the charger connected to the power supply when not in use. 8. Confirm that the charger is compatible with your battery type and do not use it with LiFePo4 batteries, as this may cause overheating.

The 48V eBike battery charger is equipped with an input of 100-240VAC at 50/60Hz and an output of 54.6V at 1.5A. It features a XLR-3Pin connector with clear indications for positive, negative, and ground. The charger undergoes rigorous testing to ensure precision and safety, with protections against short circuit, over current, and over voltage. It automatically stops charging when the battery is full.

Consider replacing a broken charger or having an extra one on hand for charging in different locations without the need to carry the original charger. Make sure to check the plug size before ordering to ensure compatibility.

product information: